Metal Roofing

Big Mike's Dousman WI

If your browser has pop-up blocker, you may need to "allow pop-ups" to view entire site.

METAL ROOFING

DECRA METAL 3-DIMENSIONAL SHINGLES
From Corona, California

Made with 28 ga. Galvalume steel stamped to appear to be a 3-dimentional shingle. It has chips of colored stone baked on for the look of a regular shingle.

50 YEAR WARRANTY!!!

COMES IN 5 COLORS!!!
Fawn Gray, Canyon Brown, Vintage Slate, Woodland Green, Midnight Eclipse

FIRE-PROOF . . . Will not crack, break, curl, split or rot.

Can be applied to new construction or re-roofed over underlayment of felt. Minimum pitch is 3/12. Roofing is fastened with galvanized hex head screws.

Comes in 19” x 48” sections which lock up and overlap by 1 ¼” on each side. 15 pieces per 100 sq. feet.
This roofing weighs 125 # per square compared to conventional 50 year 3-dimensional shingles that weigh 325 # per square.
Withstands 120 M.P.H. winds and resists hail penetration
Although the cost of this product is twice that of conventional 50 year 3-dimensional shingles, in a re-roof job you can save on tear off and dumpster expenses. Also because the pieces are larger than conventional shingles, the time to install the new roof in cut in half!!!

STANDING SEAM METAL ROOFING

This material is applied over a waterproof surface such as ICE & WATER SHIELD or 30# felt paper.

Available in 12" or 16" widths and lengths to go from the eave to the ridge.

Fastened in place with pan head screws. As each panel is installed the next panel is clipped over the previous panel covering the screws.

The steel is coated with a Galvalume finish that resists rust even if the panel is scratched down to the bare metal.

30 Year Paint Warranty

18 Colors Available

Weighs only 80# per 100 Sq. Ft. compared to conventional shingles that range from 235# to as much as 305# per Sq. Ft.

Home Windows Doors Siding Pole Buildings Barn Work Metal Roofing About Us Contact Us

YOU ARE VISITOR NUMBER THANKS!
Last update 01/11/2008 by The Scholtz Site